1/2 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR12OTN

1/2 Gas solenoid valve Elektrogas VMR12OTN\nCertified: EN161 Class A Group 2 Gas safety shut off\nFunction: 2/2 way Normally Closed\nPort: 1/2 BSP, Option NPT thread (N)\nBody: Brass\nSeals: NBR\nOperation: direct acting\nGas Pressure: 0 to 200mBar\nOrifice: 6mm\nKv flow factor: 9.16 L/Min. \nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC\nProtection: IP65 with connector (Included)\nCoil option: ATEX hazardous area available upon request.\n\nThe VMR120 type valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment. The VMR120 type valves are made in accordance with EN161 standards and the CE test certificate is issued from GASTEC (Pin 0063AQ1350).\n\nVMR1930.2101 230vAC coil to suit\nVMR1930.2151 24vAC/DC coil to suit\nVMR1930.2171 12vAC/DC coil to suit

134 in stock Model: VMR120TN

1/2 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR12

1/2 inch Gas Solenoid Valve Elektrogas VMR12\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/2 BSP, Option NPT thread (N)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar\nMedia: Air and Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 4.8 m3/hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nVoltage: 230vAC standard, options for 12vDC, 24vDC, 24vAC and 110vAC are special order.\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \nOther options: (P) POC proof of closure available upon request.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR12 is an auto reset gas solenoid valve fast opening single-stage suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.

3 in stock Model: VMR12