Air actuated ball valves, pneumatic coaxial valves and angle valves are Controlled Via a compressed air supply Instead Of An Electrical Supply can be either single acting (fail safe return) or double acting (air to open and close) suitable for most applications.

Mechanical pneumatic control valves with roller, twist selector, mushroom palm button, detent button, push-pull button or lever either 2/2; 3/2; 4/2; 4/3; 5/2 and 5/3 way for compressed air to 10 Bar.

Push in fittings for fast connection of pneumatic nylon and polyurethane tube to tube or tube to thread, Plastic or 316 stainless steel.

Air Operated angle seat piston valves also known as Air Actuated Globe or Y pattern valves suitable for air, water, oil, grease, vacuum, steam, thick viscous fluids, acids and alkali's.

Spare Solenoid Armature Assemblies, 2/2 way normally closed; normally open and 3/2 way with NBR, Viton, EPDM or PTFE manufactured from Brass or Stainless Steel.

Pneumatic non return valves and silent full flow check valves with silent noiseless directional flow control with anti water hammer design.

Coaxial solenoid and air actuated 2/2 & 3/2 Way Valves in Brass, Steel and 303 or 316 Stainless Steel.

Solenoid coils according to bore diameter, height and power level. IP54, IP65, IP67, IP68 and ATEX zone 21 and zone 22 protection either Class F Class H and Class N DIN43650A,B and flying lead wire.

EN 175301-803 (DIN43650A) Form A 28mm square, Industrial Form B 21x28.5mm and Micro C 15.6x15.6mm Connectors with or without circuits LED, VDR, Rectified and pre-wired field mountable electrical connectors.

Dust Collecting Valves, Pulse Jet Diaphragm Valves for dust collectors, gas turbine filtration systems, environmental equipment and desulfurization equipment for reverse pulse jet filter cleaning of air bag filters, envelope filters, ceramic filters and sintered metal fibre filters.

Emergency stop isolation electric buttons, air valves, soft start valves and switch boxes.

Coalescing filters, activated carbon filters and 3 stage breathing air combination sets for high purity air.

Y Pattern filters and strainers designed to remove debris from liquids manufactured from stainless steel, pressures 0 to 55 Bar, Seals PTFE, Temperature -29C to +232C.

Ball float valves for mechanical water tank level control. They work by rising water level in the tank that lifts the ball to shut off the water refill, when water level and then ball drops reopening the valve to refill the tank.

Pilot Float valves for mechanical water tank level control, that operate via an external controller or Float Ball Valve for reliable mechanical water tank refilling without electrical input. Manufactured from Ductile Iron or Stainless steel.

Pneumatic control foot pedal air control valve 3/2 or 5/2 function, spring return or detent (lock) with or without foot guard.

Foot strainer valves for water inlet protection for suction systems includes filter screen, internal check valve protecting against loss of suction and aids in pump priming reducing suction pump run dry time and incorporates a lever operated back flush system.

Shako FRL Spares: Filter Elements, Bowls + Guards, Drains, Brackets, Gauges + Plugs, Spacer Blocks and other accessories.

Permanent Magnets for solenoid valves - Great engineering tool that can replace the electro magnetic (coil) with this permanent magnet. Ideal for commissioning and testing solenoid valves where no electrical supply is available or as manual over ride. Our SVOM - Solenoid Valve Operating Magnet.

Metal and Stainless Steel Pressure Gauges 1/8 and 1/4 inch rear entry 42mm and 53mm diameter with pressure ranges 0-10 Bar, 0-20 Bar and 0-30 Bar.

Pressure Reducing Valves (PRV), Pressure Sustaining Valves (BPV) and Pressure Relief Valves (PLV).

High pressure regulators, including manual, manual with solenoid shut off and proportional 0-10volt control for fluids up to 200 Bar.

Digital pressure switches and transducers / transmitters for electronic pressure monitoring and switching.

Proportional pressure regulators, 0-10 volt or 4 to 20 milliamp, offering precise pressure control for air or fluids up to 200 Bar (3000psi).

Spare Seals + Diaphragm kits to suit Shako PU and SPU valves, Queen MD series and Z Tide pressure control valves. Choose NBR, EPDM, Viton and HNBR.

Solenoid valves mounted or assembled onto a common manifold, 2/2, 3/2 and 5/2 way function Brass + Stainless Steel for pressures up to 150 Bar.

Solenoid Valves with inlet at 90° (Right angle) to outlet, available in different sizes and voltages.

High speed valves pilot, dust collecting, Pneumatic and coaxial valves up to 2000 Hz, 2/2, 3/2 + 5/2 way.

Sub Base Mount + Namur Solenoid Valves that can be fitted or mounted to a manifold system that will share a common inlet or outlet.

Non contact suction pad uses compressed air to lift without touching.

Cycle timers, condensate drain valves and timer control motor ball valves including repeat, single shot, delay and digital programmable timers from 0.5 seconds to 59 hours. Designed for fully automated ON/OFF open/close control for fluid and gas systems.

Polyurethane tubing, 100 + 200 MTR rolls, metric or imperial sizes up to 16mm in all colours.

Vacuum release valves designed to vent air and prevent vacuum also known as an Air and Vacuum Release Valves, Cast Iron or stainless steel, sizes 1/2 to 1 inch thread.

Shako VV Vacuum generators utilise compressed air (1 to 6 Bar) to generate vacuum to -91.8 Kpa, sizes 1/8, 1/4 or 3/8.

Water hammer arrestors designed to absorb and remove water hammer banging, thumping, clanking and rattling caused by water hammer shock waves.

Water leak detection systems automatically shut off water supply when water leaks are detected, with alarm.

Solenoid valve discounted, end of line and older stock items that are still new and unused being sold at bargain basement or below cost price. When the stock is gone - its gone. Some items have been replaced with upgraded versions.