1/8 - 1/2 Stainless Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm

100 Bar stainless solenoid valve CS Fluid Power SAPS\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Min 1 Bar pressure differential)\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 1 to 100 Bar\nOrifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)\nKv flow factor: 9.1 litres a minute based on water with a 1 Bar pressure difference.\nSealing: PTFE + NBR, option PTFE with EPDM, HNBR, Neoprene, ECO, Silicone or VST. Option elastomer seal only 40 Bar max.\nMedia: air, water, oil, carbon dioxide and most other slightly corrosive gases or fluids under 50CST compatible with materials of construction.\nCoil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.\nProtection: IP65 LED connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.\nIdeally suited for low temperature media down to -60C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.\nAll SAP solenoid valves are 100% pressure and leak tested.

29 in stock Model: SAPS

Solenoid Coil Core 16mm, H 40.5mm, W 50.0mm, L 50.0mm WPA3C 22W

Solenoid valve Coil Core 16mm CS Fluid Power WP-A3-C\nBore: 16.6mm, Top plate 8.2mm\nHeight: 43.2mm\nDiameter: 52.0mm\nInsulation: Class H (180°C / 311°F)\nAmbient Temp: -20°C to +60°C / -4°F to +140°F\nProtection: IP54 with 30cm flying lead wires\nRating: 100% duty rated\nAvailable voltages: 12vDC, 24vDC, 48vDC or 24vAC, 110vAC, 230vAC 50/60Hz.\n\n\nPower 12vDC: 21.6 Watts, 2.97 Amp, Resistance 4.1 Ohm +/- 3% at 20-25°C (Wires Blue + White)\n\nPower 24vDC: 22.6 Watts, 1.54Amp, Resistance 15.7 Ohm +/- 3% at 20-25°C (Wires Red + White)\n\nPower 24vAC 50Hz: 27.5 Watts, 2.42 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\nPower 24vAC 60Hz: 20.3 Watts, 1.83 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\n\nPower 110vAC 50Hz: 24.8 Watts, 0.61 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\nPower 110vAC 60Hz: 19.3 Watts, 0.46 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\n\nPower 220vAC 50Hz: 12.4 Watts, 0.14 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 220vAC 60Hz: 10.3 Watts, 0.11 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \n\nPower 240vAC 50Hz: 17.8 Watts, 0.2 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 240vAC 60Hz: 14.3 Watts, 0.15 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red)

26 in stock Model: WPA3C

Plunger for SAP + SAPS high pressure solenoid valve

Plunger assembly to suit SAP + SAPS CS Fluid Power solenoid valve\n\nPressure range: 1 to 100 Bar\nFits models: Brass SAP6150, SAP8150, SAP10150, Stainless steel SAPS6150, SAPS8150, SAPS10150.\n\nDimensions: 14mm x 24.6mm\nSeal: PTFE\n

2 in stock Model: SP-SAPS-PLUNGER