1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320

Manifold assembly kit for Shako PU320 PU300

PU300 PU320 Manifold assembly kit mounting kit.\nManifold assembly fit for 3/2 way solenoid valves\nContains: 1x NBR O Ring, 2x screws, 2x washers, 2x nuts and 2x double ended manifold building bolts and 2x washers\nThis mounting-kit allows users to bolt together the PU320 3/2 way normally closed and PU300 3/2 way normally open solenoid valve bodies to form a single inlet manifold. \n1 mounting kit required for each miniature solenoid valve starting from the second valve. i.e. 3 solenoid valves require 2 kits, 5 solenoid valves require 4 kits up to a maximum of 10 solenoid valves requiring 9 kits. \nWe suggest for manifolds over 5 stations that the inlet ports from both ends are connected to allow for maximum inlet flow. \nWe are happy to assemble these for you when ordering the PU320 and PU300 solenoid valves at no additional charge, just advise when ordering.\n

150 in stock Model: mounting-kit

1/8 1/4 solenoid valve 3/2 N/Open 0-8 Bar 1.4mm

1/8 1/4 inch 3 way solenoid valve Shako PU300 (PU320N)\nFunction: 3/2 way normally opend\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (Top brass port 1/8)\nPort option: Sub base mounting (requires mounting kit nuts, bolts + O ring)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320 can be assembled into a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied assembled just tick and order the mounting kit option and send us a message to assemble when checking out and we will be happy to assemble your manifold system for you at no additional charge. \nNote: 2 valves require 1 assembly kit, 3 valve 2 kits, 4 valves 3 kits, etc.\n\nThe PU30002-12vdc is a very popular solenoid control valve for the head light vacuum system for Lotus Elan Sprint 1971, 1972 and 1973 and Lotus Elan +2 and +2S 130/5 speed, piped up A to headlight and R to manifold vacuum.

90 in stock Model: PU320N

1/8 1/4 Banjo 3/2 solenoid valve 0-8 Bar 1.3mm (ATEX option)

3 way solenoid valve with banjo bolt fitting.\nFunction: 3/2 way normally closed with manual over ride\nPort: 1/8 or 1/4 BSP thread (Banjo bolt)\nPressure: 0 to 8 Bar\nMedia: Compressed air (40 micron filtered)\nOrifice: 1.3mm\nFlow factor: Cv 0.15\nBody: Nylon 6 with 30% glass fibre\nSeals: NBR\nMedia Temperature: -20C to +80C\nAmbient Temp: -20 to +50C Max\nVoltage: 12vDC, 24vDC, 24vAC, 110vAc or 230vAC\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltages: 6vDC, 12vdc, 24vdc, 48vdc, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.:

7 in stock Model: PU320B