3/8 Brass Solenoid Valve 0-12 Bar 2/2 Normally Closed PU220A-03H

3/8 inch Brass solenoid valve Shako PU220A-03H ®\nFunction: 2/2 way normally closed\nOperation: Assisted lift (zero-rated)\nPort: 3/8 BSP, option NPT or Rc thread\nPressure: 0 to 12 Bar.\nOrifice: 13.0mm\nKV flow factor: 35 L/min based on water with 1 Bar pressure drop.\nSeals: Viton standard, option EPDM, NBR or HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 18.5 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nHS Code 8481 8059

212 in stock Model: PU22003H

3/8 Stainless Solenoid Valve 0-12 Bar 2/2 Normally Closed SPU220A-03H

3/8 inch Stainless Steel solenoid valve Shako SPU220A-03H\nFunction: 2/2 way normally closed\nOperation: Assisted lift (zero-rated)\nPort: 3/8 BSP, option NPT or Rc thread\nPressure: 0 to 12 Bar.\nOrifice: 13.0mm\nKV flow factor: 35 L/min based on water with 1 Bar pressure drop.\nBody: 316 stainless steel\nInternals: Stainless steel\nSeals: Viton standard, option EPDM, NBR or HNBR\nShading ring: Copper, option silver shading ring or without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.\nMedia: air, water, vacuum 80%, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +180°C with Viton seals, -15°C to +80°C NBR, -40°C to +150°C HNBR, -5°C to +130°C EPDM seal material.\nCoil: 18.5 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 0-3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nHS Code 8481 8059

12 in stock Model: SPU22003H