1/8 Brass Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature brass solenoid valve CS Fluid Power AD6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressures over 30 Bar)\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67, Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67, Class H 100% duty rated\nCoil option AD60**: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

96 in stock Model: AD6000

Solenoid Coil Core 16mm, H 40.5mm, W 50.0mm, L 50.0mm WPA3C 22W

Solenoid valve Coil Core 16mm CS Fluid Power WP-A3-C\nBore: 16.6mm, Top plate 8.2mm\nHeight: 43.2mm\nDiameter: 52.0mm\nInsulation: Class H (180°C / 311°F)\nAmbient Temp: -20°C to +60°C / -4°F to +140°F\nProtection: IP54 with 30cm flying lead wires\nRating: 100% duty rated\nAvailable voltages: 12vDC, 24vDC, 48vDC or 24vAC, 110vAC, 230vAC 50/60Hz.\n\n\nPower 12vDC: 21.6 Watts, 2.97 Amp, Resistance 4.1 Ohm +/- 3% at 20-25°C (Wires Blue + White)\n\nPower 24vDC: 22.6 Watts, 1.54Amp, Resistance 15.7 Ohm +/- 3% at 20-25°C (Wires Red + White)\n\nPower 24vAC 50Hz: 27.5 Watts, 2.42 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\nPower 24vAC 60Hz: 20.3 Watts, 1.83 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\n\nPower 110vAC 50Hz: 24.8 Watts, 0.61 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\nPower 110vAC 60Hz: 19.3 Watts, 0.46 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\n\nPower 220vAC 50Hz: 12.4 Watts, 0.14 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 220vAC 60Hz: 10.3 Watts, 0.11 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \n\nPower 240vAC 50Hz: 17.8 Watts, 0.2 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 240vAC 60Hz: 14.3 Watts, 0.15 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red)

26 in stock Model: WPA3C

1/8 1/4 3/8 1/2 Brass Solenoid Valve 0-10 Bar 2/2 N/Open 3-6mm

1/8 1/4 3/8 1/2 inch Small brass solenoid valve CS Fluid Power NOAD612 \nFunction: 2/2 way normally open\nOperation: Direct acting\nPort sizes: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nPressure: 0 to 10 Bar according to orifice and coil power level.\nVacuum: 10-4 Torr\nBody: Brass\nInternals: stainless steel\nSeals: FKM standard, Option NBR, EPDM, Silicone, PTFE, VST, HNBR, Neoprene and Hypalon.\nMedia: air, water, light oils and most other fluids under 50CST and gases compatible with materials of construction.\nOrifice: 3mm, 4mm, 5mm or 6mm (option according to port size)\nKv flow factor: 3.7 to 11.3 L/Min based on water with 1 Bar pressure drop.\nCoil: WPG2 18 Watt UL CSA CE IP67 Class H certified 100% duty rated DIN43650A\nProtection: IP65 with LED connector (Included)\nVoltage: 12vDC, 24vDC, 48vDC, 110vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.

12 in stock Model: NOAD612

1/8 1/4 3/8 1/2 Brass Valve 0-3.5 Bar 2/2 Latching 3-8mm

1/8 1/4 3/8 1/2 Brass latching solenoid valve CS Fluid Power LAD612.\nFunction: 2/2 way latching / bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread.\nOrifice: 3.0mm, 4.0mm, 5.0mm, 6.0mm or 8.0mm (according to port size)\nPressure: vacuum 10-6 torr to 3.5 Bar (depending on coil power and orifice)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO, PTFE and HNBR.\nMedia: air, water, light oil, vacuum and most fluids under 50 CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD6, LAD8, LAD10, LAD12 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LAD612

1/8 Brass Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/8 inch Brass latching / bi-stable solenoid valve CS Fluid Power LAD6000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 1/8 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 L/min according to orifice.\nPressure: full vacuum to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LAD6000