Description

Electronic 0 to 10 volt pressure regulating valve type 785-E
0 to 10 volt stepless pressure regulation.
Connection: G1 (BSP)
Pressure range: 12 to 160 Bar, 10 to 120 Bar, 5 to 64 Bar, 3 to 40 Bar, 10 to 200 Bar, 5 to 140 Bar or 3 to 80 Bar according to orifice and actuator.
Media: Liquid / fluid (50 micron)
Orifice: 10mm, 12mm, 15mm or 20mm
Kv flow factor: 3, 6, 8.3 or 14.1 m3/hr according to orifice
Body: AISI303 stainless
Seal: FKM
Temperature media: 0 to +60°C
Temperature ambient: 0 to +50°C
Electrical connection: M12x1
Nominal voltage: 24vDC (Max residual ripple 10%)
Voltage tolerance: +/- 10% according to VDE 0580
Power consumption: 2.5 Watts
Protection: IP65 with connector (Included)
Mounting: M12 connector preferred upright
Control air 8 Bar filtered to 40 micron or better
Piping: Following flow-calming sections in terms of straight conduit are best.
Before the valve (P) a length of three times the internal diameter.
After the valve (T) must be free discharge of media. No dynamic pressure and minimal flow resistance must be ensured at all times.

Equivalent To

electric flow control valve
Electronic Pressure Reducing

Related Products