Description

EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED + VDR for solenoid valves
Connection: DIN ISO4400 Form A DIN 43650A 28mm square
Voltage: 24, 110 or 230 volt
Current: 1 Amp maximum
Design: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover
Circuit: RED LED and VDR varistor with bipolar circuit protection, option Yellow or Green LED.
Drop off delay: 3mSec Max
Power consumption: 5mAmp Maximum Resistance, 4 mOhm maximum.
Conduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed
Seals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate.
Resistance: 4 mOhm Max.
Position: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),
Central fixing screw: steel 4.8 zinc plated
Contacts: CuZn, Sn/Cu plated
Temperature: -25°C to +125°C
Circuit 03

2022 PCB adjusted to the new terminal block, LED will be SMD,
24v 611-201-0152
110v 611-201-0153

In order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

Equivalent To

Amisco, KA132L54T11, KA132L55T11, KA132L56T11
Asco, 88122605, 88122608, 88122603, 88122604
Burkert, 2508 008367, 008369, 314820
GDML, 2011 LED 24 VR YE, GDML 2011 LED 24 VR, GDML 2011 LED 48 VR, GDML 2011 LED 48 VR YE, GDML 2011 LED 120 VR YE
Nass Magnet 611-201-0152, 6-11442-0523, 6-11442-0522, 611-201-0153, 611-201-0137, 611-201-0145, 611-201-0138,
ODE, KA132D10A9, KA132D54T9, KA132V54T9, KA132V55T9, KA132V56T9

Related Products