Nass Magnet 108 030 1160 ATEX solenoid coil Exia

Nass Magnet 108 030 1160 ATEX coil System 8/30 Intrinsic Safety: II 2 G Ex ia IIB/IIC T6 Ga\n\nFor use in critical (potentially explosive) environments, Nass Magnet offers components of the System 8 and System 13 series. These are designed according to DIN EN 60079 and tested by the Physikalisch-Technische Bundesanstalt (PTB) according to the European Community Directive 2014/34/EU.\n\nSystem affiliation: System 8\nPower Level: 1\nProtection: Ex i\nOverall Width: 30 mm\nElectrical Connection: DIN A\nSheathing material: Thermoset resin\nVoltage: 24 V\nCurrent: DC\nPower: 1,6 W\nVoltage Tolerance % 10 %\nVoltage Tolerance min % 10 %\nAmbient temperature range from -40 °C to +50 °C\nMaximum admissible media temperature: +70 °C\nDrawing number: 1262 00.1-00/5146

48 in stock Model: 108-030-1160

Nass Magnet ATEX Coil Ex ia IIC Core 9/8mm, H 29.5mm, W 30mm, L 28.8mm

ATEX Intrinsically Safe Solenoid coil system 8 ATEX, Width: 30mm\n\nEX i Solenoid Operator Type 1259\nCertification number: PTB 02 ATEX 2154, IECEx PTB 08.0023.\nApplied standards: EN 60079-0:2012+A11:2013, IEC 60079-0:2011(Ed.6), EN 60079-11:2012, IEC 60079-11:2011 (Ed 6).\n\nSolenoid operator 108-030-1083 (Previously 1259 00 to 1259 49) temperature class T6 Ambient -40°C to +50°C, Maximum media: +70°C\n\nSolenoid operator 108-030-1088, (Previously 1259 50 to 1259 99) temperature class T4 Ambient -40°C to +85°C, Maximum media: +80°C\n\nThe solenoid operators are suitable for side-by-side manifold assembly at a 100% duty cycle. \n\nConnection type: Form A EN175301-803-A\nMaterial: Thermoset resin\nVoltage: 24vDC Power level 1\nBarrier: IIC with 115mA 28vDC, IIC with 195mA 32vDC, \nVoltage Tolerance: +/- 10%\nAmbient temperature: -40°C to +50°C\nMedia temperature: +80°C Max\nRelative duty cycle: 100%\nInsulation class of insulating materials according to DIN VDE 0580: Class F\nProtection: IP65. Certification: PTB 02 ATEX 2154, IEC Ex PTB08.0023

48 in stock Model: 108-030-1083,108-030-1088

1 Bronze Steam Solenoid Valve 0-10 Bar 2/2 Normally Closed

1 inch Bronze steam Solenoid Valve Queen MK25S\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1 BSPP, option NPT or Rc thread\nPressure: 0 to 10 Bar\nBody: Bronze\nInternals: stainless steel\nMedia temperature: -70°C to +185°C Max\nSeals: PTFE\nMedia: Steam, hot or cold oil, water, gases and fluids under 50CST compatible with materials of construction.\nOrifice: 25.0mm \nKv flow factor: 88.66 L/min based on water with 1 Bar pressure drop. \nCoil: M17 Class H DIN43650A duty rating 100%\nVoltages: 24vDC, 24vAC (with rectified connector) 110vAC or 230vAC.

43 in stock Model: MK25S

1/2 Bronze Steam Solenoid Valve 0-10 Bar 2/2 Normally Closed

1/2 inch Bronze steam Solenoid Valve Queen MK15S\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/2 BSPP, option NPT or Rc thread\nBody: Bronze\nInternals: stainless steel\nMedia temperature: -70°C to +185°C Max\nPressure: 0 to 10 Bar\nSeals: PTFE\nMedia: Steam, hot or cold oil, water, gases and fluids under 50CST compatible with materials of construction.\nOrifice: 14.0mm \nKv flow factor: 42.9 L/min based on water with 1 Bar pressure drop. \nCoil: M17 Class H DIN43650A duty rating 100%\nVoltages: 24vDC, 24vAC (with rectified connector) 110vAC or 230vAC.

43 in stock Model: MK15S

Solenoid Coil Core 17.3/10mm, H 49mm, W 60mm, L 42/57.5mm

Solenoid valve coil Core 17.3/10mm\nBore: 17.3mm, top plate 10mm\nHeight: 49mm \nWidth: 60mm \nLength: 42/57.5mm \nWindings: Class H 180C 100% duty rated\nProtection: IP65 with connector\nPower: DC 19 Watts\nPower: AC 50/60 Hz Inrush 35VA Holding 26VA\nVoltages: 24vDC, 110vAC or 230vAC 50/60Hz\nFits NOBFE-S,NO-BFE-D,NO-BFE-S and MKS series solenoid valves\n

34 in stock Model: M17