Flanged DN10-80 Angle Seat Piston Valve 0-16 Bar 2/2 Way

Flanged Pneumatic angle body piston valve ASPVSS-F\nFunction: 2/2 way normally closed with visual position indicator, option normally open.\nOperation: 5 to 8 Bar compressed air pilot (1/8 BSP, DN65+80 1/4 BSP )\nPressure 0 to 16 Bar (flow over seat) or 0 to 8 Bar (flow under seat offering anti water hammer)\nPort: DN10 to DN80 PN16 flange, option JIS10K or ANSI150Lb\nBody: 316 stainless steel\nInternals: 316 stainless steel\nMedia Temperature: -10°C to +200°C Max \nAmbient temperature: +5°C to +60°C\nOrifice: 10.0mm to 80.0mm according to port size\nKV flow factor: 90 to 2667 L/min according to orifice.\nSeals: PTFE, option FKM and NBR\nMedia: air, water, vacuum, steam, thick glutinous fluids up to 600 CST, corrosive acid and alkali\'s compatible with 316 stainless steel and PTFE.\nActuator head: 304 stainless steel, option Polycarbonate\nActuator seals: FKM\nActuator sizes: 40mm to 125mm\n\nOptions: \nOpen position proximity switch (PS)\nOpen and closed mechanical position feed back switches with LED (E2)\nModulating Controller LED Indication 4-20mA IP65 (M1)\nModulating Controller LED Screen 4-20mA ATEX IP66 (M2)

0 in stock Model: ASPVF

Coaxial 3/2 Solenoid valve 0-64 Bar Brass Stainless 1/4 3/8 1/2 3/4 DN10

Coax solenoid valve 3 way 0-64 Bar DN10 RSG 37110\nFunction: 3/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 10mm\nKv flow factor: 51 L/Min\nPort sizes: 1/4, 3/8, 1/2 or 3/4 BSP thread, option NPT or flange\nBody Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other voltages available on request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\n\nOptions: 371A10 normally closed, 371B10 normally open, manual override, open and/or closed volt free position feed back switches, various DIN43650A connectors or aluminium terminal box and mounting brackets. \n\nThe 24vDC valve can be fitted with PWM (Pulse Width Modulating) connector with power reduction technology that reduces the holding power by up to 80% for a Greener more environmental friendly low power; low heat emission with improved thermal stability.\nPWM technology is available for other voltages upon request.

0 in stock Model: 37110