3/4 Water solenoid valve 0.2-10 Bar normally closed double 180 degree D180

3/4 plastic water washing machine double solenoid valve WRAS approved D180\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with twin 180 degree (straight) single 10.5mm or 12.5mm hose tail outlets.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), UL Underwriter Laboratories certified, MOCA FCM (Food Contact Materials), NSF food certification for public health protection. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

38 in stock Model: D180

Coaxial 3/2 Solenoid valve 0-64 Bar Brass Stainless 1/4 3/8 1/2 3/4 DN10

Coax solenoid valve 3 way 0-64 Bar DN10 RSG 37110\nFunction: 3/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 10mm\nKv flow factor: 51 L/Min\nPort sizes: 1/4, 3/8, 1/2 or 3/4 BSP thread, option NPT or flange\nBody Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other voltages available on request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\n\nOptions: 371A10 normally closed, 371B10 normally open, manual override, open and/or closed volt free position feed back switches, various DIN43650A connectors or aluminium terminal box and mounting brackets. \n\nThe 24vDC valve can be fitted with PWM (Pulse Width Modulating) connector with power reduction technology that reduces the holding power by up to 80% for a Greener more environmental friendly low power; low heat emission with improved thermal stability.\nPWM technology is available for other voltages upon request.

0 in stock Model: 37110

Coaxial 3/2 solenoid valve 0-40 Bar Brass Stainless 1/4 3/8 1/2 3/4 DN10

Coax solenoid valve 3 way 0-40 Bar DN10 RSG 37010\nFunction: 3/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 40 Bar (0 to 16 Bar reverse flow)\nOrifice: 10mm\nKv flow factor: 51 L/Min\nPort sizes: 1/4, 3/8, 1/2 or 3/4 BSP thread, option NPT or flange\nBody: Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other voltages available on request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\n\nOptions: 370A10 normally closed, 370B10 normally open, degreased for oxygen use, manual override, open and/or closed volt free position feed back switches, various DIN43650A connectors or aluminium terminal box, mounting brackets and modular sub base mounted systems. \n\nThe 24vDC valve can be fitted with PWM (Pulse Width Modulating) connector with power reduction technology that reduces the holding power by up to 80% for a Greener more environmental friendly low power; low heat emission with improved thermal stability.\nPWM technology is available for other voltages upon request.\n\nModel: 370a/10 24vDC Resistance 16.5Ohm, voltage +/- 10% 21.6 to 26.4 volts, 35 Watt 1.46Amp.

0 in stock Model: 37010