1/2 WRAS Water solenoid valve 0-10 Bar 2/2 normally closed Brass PU220D-04

1/2 inch WRAS approved Brass water solenoid valve PU220D-04\nFunction: 2/2 way normally closed with anti water hammer design (slowed close)\nPort: 1/2 BSPP thread, option NPT or Rc Thread\nPressure: 0 to 7 Bar (AC) or 0 to 6 Bar (DC Voltage) with 15 Watt Coil.\nPressure: 0 to 10 Bar with 18.5 Watt Coil.\nOperation: Assisted Lift (Zero Rated)\nTemperature: -5°C to +90°C Max\nBody: Brass\nInternals: stainless steel\nSeals: EPDM WRAS approved for water.\nWRAS Certificate Number 2306329.\nMedia: Water\nOrifice: 13mm\nKv flow factor: 59L/Min based on water with a 1 bar pressure difference.\nCoil: 15 Watt system 13/30 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.\nCoil: 18.5 Watt system 13/36 Nass Magnet Class H IP65 CE DIN43650A 100% duty rated.\nProtection: IP65 with electrical connector (Included).\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nWRAS Certificate Number 2306329.\nTested and approved 200,000 open and close cycles at 7 Bar with 25°C cold water, then a final 10.5 Bar pressure leak and function test.

406 in stock Model: PU220D-04

1/2 WRAS solenoid valve 0.3-16 Bar 2/2 Normally Closed

1/2 inch WRAS water solenoid valve Danfoss 132U1500 EV220BW\nFunction: 2/2 way normally closed with anti water hammer\nOperation: Pressure assisted, requires Min 0.3 Bar pressure difference\nPort: 1/2 BSP thread\nPressure: 0.3 to 16 Bar\nBody: Brass\nInternals: stainless steel\nSeals: EPDM WRAS certified\nOrifice: 15mm\nKv flow factor: 4 m3/Hour\nOpening speed 0.04 seconds and closing speed 0.35 seconds\nCoil: DIN43650A Class H 100% duty rated\nProtection: IP65 with electrical connector (Included)\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC\nVoltage tolerance: +/-10% Coil\nCoil Power: DC 18 watts / AC 10 Watts

10 in stock Model: 132U1500

Coaxial 2/2 solenoid valve 0-64 Bar Brass Stainless 3/8 1/2 3/4 1 DN15

Coaxial solenoid valve 2 way 0-64 Bar DN15 RSG 27115\nFunction: 2/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 15mm\nKv flow factor: 91 L/Min\nPort sizes: 3/8, 1/2, 3/4 or 1 BSP, option NPT or flange\nBody: Brass, option stainless steel 304 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction. \nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy®. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C. \n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other custom voltages available upon request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\nApprovals: TÜV, DGVM\n\nOptions: 271A15 normally closed, 271B15 normally open, manual over ride, inductive open and/or closed position switches with LED + 2mtr cable, various DIN43650A connectors or aluminium terminal box, mounting brackets and modular sub base mounted systems. \n\nThe 24vDC valve can be fitted with DIN43650A PWM connector (Pulse Width Modulating) a power reduction technology that reduces the holding power by up to 80% for a Greener environmentally friendly low power; low heat emission and improved thermal stability. \nOther PWM voltages available upon request.

0 in stock Model: 27115

Flanged DN10-80 Angle Seat Piston Valve 0-16 Bar 2/2 Way

Flanged Pneumatic angle body piston valve ASPVSS-F\nFunction: 2/2 way normally closed with visual position indicator, option normally open.\nOperation: 5 to 8 Bar compressed air pilot (1/8 BSP, DN65+80 1/4 BSP )\nPressure 0 to 16 Bar (flow over seat) or 0 to 8 Bar (flow under seat offering anti water hammer)\nPort: DN10 to DN80 PN16 flange, option JIS10K or ANSI150Lb\nBody: 316 stainless steel\nInternals: 316 stainless steel\nMedia Temperature: -10°C to +200°C Max \nAmbient temperature: +5°C to +60°C\nOrifice: 10.0mm to 80.0mm according to port size\nKV flow factor: 90 to 2667 L/min according to orifice.\nSeals: PTFE, option FKM and NBR\nMedia: air, water, vacuum, steam, thick glutinous fluids up to 600 CST, corrosive acid and alkali\'s compatible with 316 stainless steel and PTFE.\nActuator head: 304 stainless steel, option Polycarbonate\nActuator seals: FKM\nActuator sizes: 40mm to 125mm\n\nOptions: \nOpen position proximity switch (PS)\nOpen and closed mechanical position feed back switches with LED (E2)\nModulating Controller LED Indication 4-20mA IP65 (M1)\nModulating Controller LED Screen 4-20mA ATEX IP66 (M2)

0 in stock Model: ASPVF

Coaxial 3/2 Solenoid valve 0-64 Bar Brass Stainless 3/8 1/2 3/4 1 DN15

Coax solenoid valve 3 way 0-64 Bar DN15 RSG 37115\nFunction: 3/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 15mm\nKv flow factor: 91 L/Min\nPort sizes: 3/8, 1/2, 3/4 or 1 BSP thread, option NPT or flange\nBody Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nIncreased leak tightness 10-5 mbar*l/sec: valve cleaned oil and grease free, special treatment of valve seat, special seal components and then a sealing tightness test with Helium.\n\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other voltages available on request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\n\nOptions: 371A15 normally closed or 371B15 normally open, manual over ride, open and/or closed volt free position feed back switches, various DIN43650A connectors or aluminium terminal box and mounting brackets. \n\nThe 24vDC valve can be fitted with PWM (Pulse Width Modulating) connector with power reduction technology that reduces the holding power by up to 80% for a Greener more environmental friendly low power; low heat emission with improved thermal stability.\nPWM technology is available for other voltages upon request.

0 in stock Model: 37115