1 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Open

1 inch 316 stainless steel solenoid valve NOSPU225A-08 (SPU225AN-08)\nFunction: 2/2 way normally open\nOperation: pressure assisted, requires Min 0.5 Bar differential\nPort: 1 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option without ring (DC only or AC with rectified DIN connector to DC) for demin water, RO water, pure water and Adblue.\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

84 in stock Model: NOSPU22508

3/4 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Open

3/4 inch stainless steel solenoid valve NOSPU225A-06 (SPU225AN-06)\nFunction: 2/2 way normally open\nOperation: pressure assisted, requires Min 0.5 Bar differential\nPort: 3/4 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option without ring (DC only or AC with rectified DIN connector to DC) for demin water, RO water, pure water and Adblue.\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

47 in stock Model: NOSPU22506

3/4 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Closed SPU225A-06 (ATEX option)

3/4 inch stainless steel solenoid valve Shako SPU225A-06 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (Min 0.5 Bar differential)\nPort: 3/4 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option silver (AC or DC) or without ring ((DC only or AC with rectified DIN connector to DC)) for demin water, RO water, pure water and Adblue.\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nDegreasing available for oxygen use.\n\nHS code 84818030

47 in stock Model: SPU22506

3/4 Stainless Solenoid Valve 0.5-10 Bar 2/2 Latching

3/4 inch stainless steel solenoid valve Shako LSPU225A-06\nFunction: 2/2 way latching\nOperation: pressure assisted (Min 0.5 Bar differential)\nPort: 3/4 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option silver or without ring for demin water, RO water, pure water and Adblue.\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nProtection: IP65 with connector (Included)\nCoil: 22003L Latching coil 6vDC or 12vDC, 10-20 mSec power pulse stays open, reverse polarity power pulse will stay closed.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

15 in stock Model: LSPU22506

Flange DN20 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Closed

DN20 3/4 inch flange stainless steel solenoid valve SPU225F-06.\nFunction: 2/2 way normally closed\nOperation: pressure assisted (Min 0.5 Bar differential)\nPort: 3/4 DN20 PN16 welded 316 stainless flange, option ANSI150Lb or JIS10K.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option silver (AC or DC) or without ring (DC only or AC with rectified DIN connector to DC) for demin water, RO water, pure water and Adblue.\nOrifice 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nDegreasing available for oxygen use.\n\nHS code 84818030

0 in stock Model: SPU22506F