1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320

1/8 1/4 Stainless solenoid valve 0-30 Bar 2/2 Normally Closed 1.6-5mm

Stainless steel solenoid valve Compact Economy series JA\n\nPort: 1/8 or 1/4 BSPT, option NPT or Rc thread\nMounting holes: M5\nFunction: 2/2 Way Normally Closed \nOperation: Direct acting\nBody: AISI303 stainless steel\nInternals: stainless steel\nPressure: 0 to 30 Bar according to orifice, voltage (AC or DC) and coil power (10W or 18W)\nMedia Temperature: +50°C NBR, +80°C FKM or +120°C EPDM and PTFE seals \nOrifice: 1.6mm (JAB), 2.4mm (JAC), 3.2mm (JAD) or 4.0mm (JAE) - 1.2 +5mm available as special request. \nKv flow factor: 1.43 to 7.15 L/min according to orifice, based on water with 1 Bar pressure drop.\nOpening/closing time: 10-20 milliseconds Max\nSeals: FKM standard options EPDM, NBR or PTFE. \nMedia: air, water, light oils, vacuum and most other fluids under 40 CST and gases compatible with materials of construction.\nCoil: 10 Watt IP65 Class F DIN43650A 100% duty rated.\nCoil: 14-20 Watt IP65 Class F DIN43650A 100% duty rated for higher working pressures. \nProtection: IP65 with connector (Included) - Option 30cm lead wire coil.\nVoltage: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC, other options 48vDC, 80vDC, 190vDC, 12vAC, 48vAC etc available upon request\n\nWeight: 280g (with coil + connector)\n\nExample JA2BV is a 1/4\"BSP valve, FKM seal, 1.6mm orifice, 0 to 20 Bar AC 10 Watt coil or 0 to 30 Bar AC high power 14-20 Watt coil.\n\nOne of our most popular small, cost-effective quality stainless steel solenoid valves suitable for so many applications. \n\nPlunger seal kits available, EVB22000JA + seal material NBR, EPDM, FKM or PTFE

335 in stock Model: JA

1/2 Brass Solenoid Valve 0-8.5 Bar 2/2 Normally Closed PU220A-04

1/2 Brass solenoid valve Shako PU220A-04 ®\nFunction: 2/2 way normally closed\nOperation: assisted lift (zero-rated)\nPort: 1/2 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 5 Bar (DC voltage)\nVacuum: 80% vacuum -0.8 Bar Max\nBody: Brass\nInternals: stainless steel\nOrifice: 13.0mm\nKv flow factor: 35 L/min based on water with 1 Bar pressure drop\nSeals: NBR standard, option EPDM, FKM or HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS Code 8481 8059.

298 in stock Model: PU22004

1 water Irrigation Solenoid Valve 6-40vDC 2/2 latching 0.65-10 Bar

1 inch Water irrigation Solenoid Valve PN22508AL\nFunction: 2/2 way latching / bi-stable\nOperation: Pressure assisted (min 0.65 Bar pressure differential)\nPort: 1 BSP, option NPT thread.\nPressure: 0.65 Bar to 10 Bar (150 psi)\nBody: PA66 Glass Filled heavy duty Corrosion and UV resistant\nInternals: stainless steel\nSeals: NBR\nOrifice: 25mm\nKv flow factor: 7.7 cubic meters an hour based on 1 psi pressure drop.\nMedia temperature: +60°C Max (140°F). \nIncluded: Anti-water hammer design, flow controller, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve\nCoil: IP66 2.2 Watt with 30cm lead wires 100% duty rated.\nVoltages: Any 6 to 40vDC supply (Requires 4700μf capacitor) pulse 20 to 100 millisecond.\n\nThe PN22508AL latching function requires short electrical 6 volt to 40 volt DC pulse to stay open and then reverse polarity pulse to stay closed (swap +ve and -ve), repeat cycle for open and closed function. Requires 4700μf capacitor in circuit.\n\nIdeally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.

167 in stock Model: PN22508AL

Plunger or seal kit to suit JA series solenoid valve

Shako solenoid valve plunger assembly (EVB220056-JA) or seal kit (ZGJA2) fits all JA series 2/2 way normally closed stainless steel solenoid valves.\n\nOptions.\n\nPlunger Kit: AISI430F stainless Plunger with option for Viton, NBR, EPDM and PTFE seal, Stainless steel plunger spring and body O ring of same material as plunger\n\nSeal kit: Plunger seal, body O ring seal and coil O ring seals (top + base).

150 in stock Model: EVB22000JA, ZGJA2