1/8 Brass Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/8 inch Brass latching / bi-stable solenoid valve CS Fluid Power LAD6000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 1/8 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 L/min according to orifice.\nPressure: full vacuum to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LAD6000

1/8 1/4 3/8 1/2 Brass Valve 0-3.5 Bar 2/2 Latching 3-8mm

1/8 1/4 3/8 1/2 Brass latching solenoid valve CS Fluid Power LAD612.\nFunction: 2/2 way latching / bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread.\nOrifice: 3.0mm, 4.0mm, 5.0mm, 6.0mm or 8.0mm (according to port size)\nPressure: vacuum 10-6 torr to 3.5 Bar (depending on coil power and orifice)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO, PTFE and HNBR.\nMedia: air, water, light oil, vacuum and most fluids under 50 CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD6, LAD8, LAD10, LAD12 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LAD612