1 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-08 (ATEX option)

1 inch Brass solenoid valve Model PU225A-08 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1 BSP, option NPT thread\nBody: Brass\nInternals: Stainless steel\nOrifice: 25.0 mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure difference.\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nHS code 84818030

450 in stock Model: PU22508

Solenoid Coil Core 10/13.3, H 32.2, W 33, L 30.5mm, CEME B6

CEME Solenoid valve coil bore 13.3mm Type 688 B6 bobine\nBore: 13.3mm, top plate 10mm\nHeight: 32.2mm\nWidth: 33mm\nLength: 30.5mm\nPower: DC 16 watts\nPower: AC Inrush 25VA, holding 15VA \nCoil: Class: H 180°C DIN 43650A 100% duty rated IP65 \nVoltages and colour codes:\nGreen: 6 to 12 volt\nViolet: 20 to 25 volt\nYellow: 40 to 50 volt\nBlack: 100 to 130 volt\nBrown: 200 to 250 volt\nRed: 380 to 400 or 220vDC\nTolerance: AC -15% to +6%, DC -5% to +10%

12 in stock Model: 16W

3 inch Brass Solenoid Valve 0.3-10Bar 2/2 Normally Closed

CEME solenoid valve Brass 3\" Normally Closed 8621\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires Min 0.3 Bar pressure difference)\nPort: 3 BSP\nPressure: 0.3 to 10 Bar\nBody: Brass\nInternals: stainless steel\nSeals: NBR\nMedia: air, water, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nOrifice: 80.0mm\nKv flow factor: 1380 L/min based on water with 1 Bar pressure drop.\nCoil: 16 watt CE IP65 Class H 100% rated UL CSA approved DIN43650A coil and connector. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSupplied with 0.4mm, 0.6mm, 0.8mm and 1mm inlet pilot jet nozzles so the closing speed of the valve can be adjusted to prevent water hammer.

4 in stock Model: PU22528, 8621

CEME solenoid valve NBR diaphragm for 8620, 8621, 8720 + 8721

CEME solenoid valve diaphragm to suit 8620, 8621, 8720, 8721, PU22524, PU25528\n\n\nTemperature Ranges: NBR: -15°C to +80°C.\nDiameter: 149mm

1 in stock Model: 2649-NN75