Coaxial 2/2 solenoid valve 0-100 Bar Brass Stainless 1/4 3/8 1/2 3/4 DN10

Coaxial solenoid valve 2 way 0-100 Bar DN10 RSG 27210\nFunction: 2/2 way normally closed, option normally open\nOperation: direct acting\nPressure: 0 to 100 Bar (0 to 16 Bar reverse flow)\nOrifice: 10mm\nKv flow factor: 51 L/Min\nPort sizes: 1/4, 3/8, 1/2 or 3/4 BSP thread, option NPT or flange\nBody Brass, option nickel plated brass, stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C \n\nFluid Seals: FKM and PTFE, option NBR or EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy®. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C. \n\nCoil power: 53 Watts AC Rectified or 44 Watts DC\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC with other custom voltages available upon request.\nCoil: DIN43650A 100% duty rated IP65 with connector (Included)\nApprovals: TÜV, DGVM\n\nOptions: 272A10 normally closed, 272B10 normally open, manual over ride, inductive open and/or closed position switches with LED + 2mtr cable, various DIN43650A connectors or aluminium terminal box, mounting brackets and modular sub base mounted systems. \n\nThe 24vDC valve can be fitted with DIN43650A PWM connector (Pulse Width Modulating) a power reduction technology that reduces the holding power by up to 80% for a Greener environmentally friendly low power; low heat emission and improved thermal stability. \nOther PWM voltages available upon request.

0 in stock Model: 27210