Diaphragm for PU22003AR Shako Solenoid Valve VITON, EPDM or NBR

Viton, EPDM or NBR solenoid diaphragm to fit Shako PU220AR-03 Brass Solenoid Valve, will fit genuine Shako PU22003AR 2/2 way normally closed solenoid valves. \nJust choose which seal material you need. \nSeal diameter 22mm.\n

92 in stock Model: 22003AR-diaphragm

Z Tide NBR + Viton seal kit for BFE BFR BFS BFL BFF

Z Tide BF series seal kit, Controller Gasket, Gasket Pin and Bolts or full seal kit for all Z Tide pilot cylindrical valves\n\nBF-NBR-Gasket: External controller NBR gasket only, fits all types + sizes. (In Stock)\n\nKITBF-Gasket-PIN-Bolts: External controller gasket, bolts + locating pin, fits all types + sizes. \n\nFull BF Gasket Set: external controller gasket / pin + bolts and all BF seals such as Piston U Ring seal, Cylinder + Bolt O Rings, Main Seat Seal, option NBR or Viton according to valve size. \n\nAll of the above will fits all Z Tide BF Series Cast Iron, Ductile Iron + Stainless Steel BFE, BFR, BFS and BFL valve bodies as below.\n\nBF-E Electric series solenoid valve\nBF-R pressure Reducing valve\nBF-S pressure Sustaining valve\nBF-L pressure Limiting valve (pressure relief)\nBF-F pilot Float valve\n\nSuitable for valves sizes DN50 to DN200, for sizes above DN250 to DN1000 please ask. \nFull seal kits are normally order in, Gaskets + Gaskets with pin + screws are normally stock items.

22 in stock Model: KITBF

1/8 BSP stainless solenoid valve 0-100 Bar Viton 2/2 Normally Closed

1/8 BSP Stainless solenoid valve model 21233.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSPP\nBody: 303 stainless steel\nInternals: stainless steel\nPressure: 0 to 100 Bar according to coil power and voltage\nOrifice: 1.2mm.\nFlow: 0.7 L/Min according to orifice, based on water with 1 Bar pressure drop.\nTemperature: -10 to +100°C Max\nSealing: FKM\nMedia: air, water, light oils, vacuum and most other fluids under 50CST and gases compatible with materials of construction.\nCoil: 11630 10 Watt IP65 CE approved Class F 100% duty rated DIN43650A\nCoil: 31400 14-20 Watt IP65 CE approved Class F 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nVoltage: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.

3 in stock Model: 21233-20-0181

21/2 Brass Solenoid Valve 0.3-10 Bar 2/2 Normally Open

21/2 inch Brass solenoid valve NOPU225A-24 (8720-ESM-NBR)\nFunction: 2/2 way normally open\nPressure 0.3 to 10 Bar\nPort: 21/2 BSP\nOrifice: 65.0mm\nKv flow factor: 1050 L/min based on water with 1 Bar pressure drop.\nSeals: NBR\nMedia: air, water, light oil and other gases and fluids under 50 CST compatible with materials of construction.\nCoil: 16 watt CE IP65 Class H 100% rated UL CSA approved DIN43650A coil and connector. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSupplied with 0.4mm, 0.6mm, 0.8mm and 1mm inlet pilot jets, so the closing speed of the valve can be adjusted to prevent water hammer.

2 in stock Model: NOPU22524,8720

1/8 BSP stainless solenoid valve 0-90 Bar Viton 2/2 Normally Closed

1/8 BSP Stainless solenoid valve model 21633.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSPP\nBody: 303 stainless steel\nInternals: stainless steel\nPressure: 0 to 90 Bar according to coil power and voltage\nOrifice: 1.6mm.\nFlow: 1.4 L/Min according to orifice, based on water with 1 Bar pressure drop.\nTemperature: -10 to +100°C Max\nSealing: FKM\nMedia: air, water, light oils, vacuum and most other fluids under 50CST and gases compatible with materials of construction.\nCoil: 11630 10 Watt IP65 CE approved Class F 100% duty rated DIN43650A\nCoil: 31400 14-20 Watt IP65 CE approved Class F 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nVoltage: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.

2 in stock Model: 21633-20-0181