Z Tide NBR + Viton seal kit for BFE BFR BFS BFL BFF

Z Tide BF series seal kit, Controller Gasket, Gasket Pin and Bolts or full seal kit for all Z Tide pilot cylindrical valves\n\nBF-NBR-Gasket: External controller NBR gasket only, fits all types + sizes. (In Stock)\n\nKITBF-Gasket-PIN-Bolts: External controller gasket, bolts + locating pin, fits all types + sizes. \n\nFull BF Gasket Set: external controller gasket / pin + bolts and all BF seals such as Piston U Ring seal, Cylinder + Bolt O Rings, Main Seat Seal, option NBR or Viton according to valve size. \n\nAll of the above will fits all Z Tide BF Series Cast Iron, Ductile Iron + Stainless Steel BFE, BFR, BFS and BFL valve bodies as below.\n\nBF-E Electric series solenoid valve\nBF-R pressure Reducing valve\nBF-S pressure Sustaining valve\nBF-L pressure Limiting valve (pressure relief)\nBF-F pilot Float valve\n\nSuitable for valves sizes DN50 to DN200, for sizes above DN250 to DN1000 please ask. \nFull seal kits are normally order in, Gaskets + Gaskets with pin + screws are normally stock items.

22 in stock Model: KITBF

Pressure Relief Valve ductile iron flange PN16 DN50 up to DN300 0.2-4, 2-8 or 5-13 Bar

Safety Pressure Relief valve Ductile Iron BFL-D\nFunction: pressure relief valve with external pilot control\nPressure adjustment ranges: 0.2 to 4 Bar, 2 to 8 Bar or 5 to 13 Bar, system pressure displayed by pressure gauge (Included).\nPort: DN50 to DN500 PN16 flange, option JIS10K or ANSI150Lb\nBody: Ductile iron epoxy coated\nInternals: Bronze, Brass and stainless steel\nSeals: NBR, option FKM\nMedia: water or other fluids under 50 CST compatible with materials of construction.\nTemperature: +80°C max\n\nThe BFL pressure relief valve will stay closed until system pressure reaches set maximum, then the valve quickly opens releasing excess pressure, when the pressure drops to maximum setting the valve carefully closes to prevent pressure surges.

6 in stock Model: BFL-D

M3 5/2 Air solenoid valve double acting 1-8 Bar 10mm wide PM521D

Miniature 5/2 way double acting solenoid valve. Shako PM521AD + PM521BD\n\nFunction: 5/2 way diuble acting\nOperation: internal pilot\nPort: M3 thread PM521AD or base mount PM521BD\nOption: M5 manifold to suit (PM521AD or PM521BD)\nWidth: 10mm\nPressure: 1 to 7 Bar, Max working 8 Bar\nCycle rate: 500 cycles per minute (max)\nOrifice: 1.0mm²\nTemperature: -10°C to +60°C\nBody: Aluminium alloy\nSeals: NBR\nMedia: Compressed air and inert gases\nCoil: 2.5 Watt IP65 Class F 100% duty rated with JPC connector and LED.\nVoltages: 6vDC, 12vDC or 24vDC

5 in stock Model: PM521D

Pressure Relief Valve stainless steel flange PN16 DN50-DN300 0.2-4, 2-8 or 5-13 Bar

Pressure Relief Valve Stainless steel Z Tide BFL\nFunction: safety pressure relief valve with external pilot control \nBody: 304 or 316 stainless steel\nInternals: stainless steel\nInlet pressure: 25 Bar max, tested 38 Bar\nPressure relief range: 0.2 to 4 Bar, 2 to 8 Bar or 5 to 13 Bar.\nPort: DN50 to DN500.\nFlange: PN16 standard, option ANSI150Lb or JIS10K\nSeals: NBR standard, option FKM\nPressure gauge: stainless steel (Included), displays inlet pressure.\nMedia: water or fluids under 50 CST compatible with materials of construction.\nMedia Temperature: -15°C to +80°C Max\n\nThe BFL-S stainless steel pressure relief valve will stay closed until system pressure reaches set maximum, then the valve will quickly open releasing excess pressure, when the pressure drops back to its setting the valve will carefully close to avoid back pressure surges.

0 in stock Model: BFL-S