Electrical Connector 2P+E Form A with LED + VDR IP65 PG9 24v 110v 230v
EN 175301-803 (DIN43650A) square electrical connector 2 pin + earth with Red LED + VDR for solenoid valves\nConnection: DIN ISO4400 Form A DIN 43650A 28mm square\nVoltage: 24, 110 or 230 volt\nCurrent: 1 Amp maximum\nDesign: standard 2 Piece Black Polyamide PA6 GF30 housing with clear cover\nCircuit: RED LED and VDR varistor with bipolar circuit protection, option Yellow or Green LED. \nDrop off delay: 3mSec Max \nPower consumption: 5mAmp Maximum Resistance, 4 mOhm maximum. \nConduit entry: PG9 (cable 6 to 8mm) or M20x1.5mm with grommet removed\nSeals: NBR LABS-free 6 Grommet, gasket and cover gasket, max Wire Connection: clamping contact Wire 0.5 to 1.5mm, with wire protecting plate. \nResistance: 4 mOhm Max.\nPosition: ground (Earth) position 12h (can be adjusted to 3h, 6h or 9h),\nCentral fixing screw: steel 4.8 zinc plated\nContacts: CuZn, Sn/Cu plated\nTemperature: -25°C to +125°C\nCircuit 03\n\n2022 PCB adjusted to the new terminal block, LED will be SMD, \n24v 611-201-0152\n110v 611-201-0153\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.
2157 in stock Model: DIN2LEDRVDR