1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1 BSP Motor ball valve WRAS 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM08S

1 inch Motor Actuated WRAS Ball Valve Mini series ABVM08S ®.\n\nMotor Actuator:\nOpen/Close: 4 to 6 seconds.\nIncludes: visual position indication.\nTemperature (ambient): -15°C to +50°C. \nCycle life: 100,000+ open/close, 100% rated.\nPower Consumption: 1 to 5 watts when moving.\nControl options: Failsafe return or Power Open/Close.\nPower supply: 9-24v 2 amp, 110-240v 500mA recommended.\nVoltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.\n\nBall Valve: \nBore: 25.0mm\nPressure: 0 to 10 Bar\nBody: 304 stainless steel\nWRAS Certificate 2012107\nPort 1 BSP, optional NPT thread\nSeals: PTFE + EPDM (WRAS Approved).\nTemperature (media): -15°C to +100°C. \nMedia: air or water suitable with 304 stainless steel, EPDM + PTFE.\n\nOptions to choose.\n\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM08S/9AR + ABVM08S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM08S/9AR-NO + ABVM08S/2AR-NO)\n\nFailsafe actuators require minimum 30 second power ON for recharging. \n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire. \nPower to GREEN valve opens or power off valve closes. (ABVM08S/2 and ABVM08S/9)\n\n4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.\n\nOther options.\n\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor. \nAvailable low voltage only. (ABVM08S/9AR-MO, ABVM08S/9AR-NO-MO, ABVM08S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors or wet environments).\n\nE2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.\nVolt free feed back (no voltage supplied from actuator). \nSwitch rating 0 to 36vDC 0.4 Amp Max. (ABVM08S/9AR-E2, ABVM08S/2AR-E2, ABVM08S/9-E2, ABVM08S/2-E2) \n\nTechnical Specifications \n\nSpeed: \n9-24 volt: Open 4 second / close 4 seconds\n110-240 volt: Open 4 seconds / Close 6 seconds.\n\nStart Power\n9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.\n\nMoving Power:\n9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.) \n110-240 volt: 2 to 5 Watts, 50 to 100mA. \n\nMaximum Voltage:\nActuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.\nActuators with manual override can operate from 9 to 35 volts AC/DC. \n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM to a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.

1009 in stock Model: ABVM08S

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Open NOPU22504

1/2 normally open Brass solenoid valve NOPU22504 (PU225AN-04)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires min 0.5 Bar pressure differential)\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nPort: 1/2 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nOrifice 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

585 in stock Model: NOPU22504

3/4 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Open NOPU22506

3/4 normally open Brass solenoid valve, Model NOPU225A-06 (PU225AN-06)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 3/4 BSP, option NPT thread\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

583 in stock Model: NOPU22506

3/4 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-06 (ATEX option)

3/4 inch Brass solenoid valve Model PU225A-06 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 3/4 BSP, option NPT thread\nBody: Brass\nInternals: Stainless steel\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure difference.\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\n\nHS code 84818030

583 in stock Model: PU22506