1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320

DN150 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR952

6 inch Gas Solenoid Valve EN161 Elektrogas VMR952\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 6\" DN150 PN16 flange, (Option ANSI150Lb)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar (6000 mbar)\nMedia: Air, Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 315.0 m³/Hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nProof of closure: 1/8BSP port to accept PCS switch fitted as standard.\nVoltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \n\nOption: Proof of closure switch (P): Mechanical closed position electrical switch PCS95.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR952 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.

1 in stock Model: VMR952

Coaxial 3/2 Pneumatic valve 0-100 Bar Brass Stainless 2 inch DN50

Coax air pilot valve 3 way 0-100 Bar DN50 RSG 38150\nFunction: 3/2 way normally closed, option normally open\nOperation: air pilot control 3 to 8 Bar 1/4 BSP and Namur interface\nPressure: 0 to 100 Bar (0 to 16 Bar reverse flow)\nOrifice: 50.0mm\nKv flow factor: 700 l/min\nPort size: 2 BSP thread, option NPT or flange\nBody: Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nOptions: normally closed 381A50, normally open 381B50, mounting brackets, inductive open and/or closed position switches with LED + 2mtr cable, oil and grease free.

0 in stock Model: 38150