DN125 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR932

5 inch Gas Solenoid Valve EN161 Elektrogas VMR932\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 5\" DN125 PN16 flange, (Option ANSI150Lb)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar\nMedia: Air, Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 250.0 m³/Hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nProof of closure: 1/8BSP port to accept PCS switch fitted as standard.\nVoltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \n\nOption: Proof of closure switch (P): Mechanical closed position electrical switch PCS95.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR932 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.\n\nVMR1930.1990 230vAc coil for VMR932

2 in stock Model: VMR932

Coaxial 3/2 Pneumatic valve 0-100 Bar Brass Stainless 1/2 3/4 1 11/4 DN20

Coax air pilot valve 3 way 0-100 Bar DN20 RSG 38120\nFunction: 3/2 way normally closed, option normally open\nOperation: air pilot control 3 to 8 Bar 1/4 BSP and Namur interface\nPressure: 0 to 100 Bar (0 to 16 Bar reverse flow)\nOrifice: 20.0mm\nKv flow factor: 113 l/min\nPort sizes: 1/2, 3/4, 1 and 11/4 BSP thread, option NPT or flange\nBody: Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nOptions: normally closed 381A20, normally open 381B20, mounting brackets, inductive open and/or closed position switches with LED + 2mtr cable, oil and grease free.

0 in stock Model: 38120