1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/8 1/4 Brass 3/2 solenoid valve 0-15 Bar 1.5-3mm

1/8 1/4 inch 3/2 miniature brass solenoid valve 300201\nFunction: 3/2 way Normally closed, option normally open or universal.\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (top port 1/8 male)\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 15 Bar depending on orifice and coil power\nOrifice: 1.5mm, 2.0mm, 2.5mm and 3.0mm\nKv flow factor: 1.2 to 2.8 L/min according to orifice based on water with 1 Bar pressure drop.\nSeals: FKM standard, option NBR or EPDM. \nMedia: compressed air, vacuum, fuels, water and light oils and most other fluids under 40CST and gases compatible with materials of construction.\nCoil: 11630 10 Watt IP65 CE DIN43650A Class F 100% duty rated\nCoil: 31400 higher power 14-20 Watt IP65 CE DIN43650A Class F 100% duty rated\nProtection: IP65 with connector (Included)\nVoltage: 12vDC, 24vDC, 48vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC and 380vAC 50/60Hz. \nThe 300201 is one of our best selling miniature compact Brass 3 port 2 position solenoid valves and the preferred option for compressor drain, vegetable oil converted diesel vehicles and pneumatic actuator control.

16 in stock Model: 300201

Coaxial 3/2 Pneumatic valve 0-64 Bar Brass Stainless 1 11/4 11/2 DN32

Coax air pilot valve 3 way 0-64 Bar DN32 RSG 38032\nFunction: 3/2 way normally closed, option normally open\nOperation: air pilot control 3 to 8 Bar 1/4 BSP and Namur interface\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 32.0mm\nKv flow factor: 298 l/min\nPort sizes: 1, 11/4 or 11/2 BSP thread, option NPT or flange\nBody: Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C. \n\nOptions: normally closed 380A32, normally open 380B32, mounting brackets, inductive open and/or closed position switches with LED + 2mtr cable, oil and grease free.

0 in stock Model: 38032