Solenoid Coil Core 16.1mm, H 50mm, W 37.5mm, L 37.5mm M16

M16 Solenoid coil ISO 43650A 26 Watt 16mm bore\nDIN43650A Class F windings (155C), IP65 protection (with connector)\nDimensions: Core/ID 16.1mm, Height 50mm, Width/diameter 37.5mm. \nVoltages: 12vDC, 24vDC, 48vDC, 125vDC or 24vAC, 110vAC or 230volt AC 50/60Hz. \nPower: DC 26 Watts\nPower: AC 50/60 Hz = Inrush 70VA Holding 35VA\n\nResistance: \n12vDC 5.3 Ohms 2.14 Amps, \n24vDC 21.7 Ohms 1.1 Amps\n48vDC 84 Ohms\n125vDC 581 Ohms \n24vAC 4.1 Ohms\n110vAC 59 Ohms 0.27 Amps\n220vAC 259 Ohms 0.12 Amps.\n\nCommonly found on many hydraulic valve systems and Queen MD and Z Tide BFE solenoid valves.

22 in stock Model: M16

Coaxial 2/2 Pneumatic valve 0-64 Bar Brass Stainless 3/4 1 11/4 11/2 DN25

Coax air pilot valve 2 way 0-64 Bar DN25 RSG 28025\nFunction: 2/2 way normally closed, option normally open\nOperation: air pilot control 3 to 8 Bar 1/4 BSP and Namur interface\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 25.0mm\nKv flow factor: 192 L/min\nPort sizes: 3/4, 1, 11/4 or 11/2 BSP thread, option NPT or flange\nBody Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nOptions: normally closed 280A25, normally open 280B25, mounting brackets, inductive open and/or closed position switches with LED + 2mtr cable, oil and grease free, modular manifold systems and custom solutions.

0 in stock Model: 28025