Ductile Iron solenoid valve flange DN50-500 2/2 N/Open 0.7-10 Bar NOBFE

Flange Ductile Iron solenoid valve Z-Tide NOBFE-D\nFunction: 2/2 way normally open with manual override and anti water hammer design\nOperation: pressure assisted (requires min 0.7 Bar pressure difference)\nPressure: 0.7 to 10 Bar \nPort: Flange DN50 to DN1000 PN16, option ANSI150Lb\nBody: Ductile iron with epoxy coating\nInternals: Bronze and stainless steel\nPiston: Bronze\nSeals: NBR U ring standard, option FKM or EPDM\nMedia: Water or fluids under 50 CST compatible with materials of construction.\nOpen / close time: 3 to 5 seconds\nVoltage: 12vDC; 24vDC; 125vDC or 24vAC, 110vAC or 230vAC 50/60Hz\nCoil: M16 26 Watt IP65 CE DIN43650A 100% duty rated.\nProtection: IP65 with connector (included)\nCoil option: ATEX EExmIIT4 for hazardous area zones 21 and 22.\n\nThe BFE drum valve is with external pilot solenoid controller and manual override with patented cylindrical multi-functional valve design and internal piston are a perfect solution for large bore pipelines requiring high flow, anti-hammer design offering easy installation, maintenance and transport. \nThe external control solenoid valve is easily removed leaving a very robust cylindrical valve body, the internal piston design allows for very high flow rates as compared to standard solenoid valves.

35 in stock Model: NOBFE-D

Pilot Float Valve Ductile Iron Flange DN50-500 0.3-16 Bar

Level control valve with external pilot control BFF\nFunction: external pilot control with float ball valve with anti water hammer design\nSizes: DN50 to DN500 flange PN16, option JIS10K or ANSI150Lb\nPressure 0.5 to 20 Bar, tested 32 Bar\nBody: Ductile Iron with epoxy coating. \nInternals: Brass, Bronze and stainless steel\nSeals: NBR, option Viton\nTemperature: +80°C max\nMedia: water and other fluids under 50 CST compatible with materials of construction.\nOpen / close time: 3 to 5 seconds\n\nThe BFF-D ductile iron float valve requires a pilot sub valve (ball float) that controls the main function of the valve that can be remotely piped and connected via a 1/2 BSP female threaded adaptor on the valve body. \nWhen the ball float drops and opens it releases the back pressure the main BFF valve which then opens to refill the tank, when the level rises the ball float lifts and generates back pressure to close the main valve and water flow stops.

13 in stock Model: BFF-D

Ductile Iron solenoid valve flange DN50-500 2/2 N/Closed 0.7-10 Bar BFE

Flanged Ductile Iron solenoid valve Z-Tide BFE-D\nFunction: 2/2 way normally closed with manual override and anti water hammer design\nOperation: pressure assisted (requires min 0.7 Bar pressure difference)\nPort: Flange DN50 to DN1000 PN16, option ANSI150lb or JIS10K\nPressure: 0.7 to 10 Bar (Option 0.7 to 16 Bar)\nBody: Ductile iron with epoxy coating\nInternals: Bronze and stainless steel\nPiston: Bronze\nSeals: NBR U ring standard, option FKM or EPDM\nMedia: Water or fluids under 50 CST compatible with materials of construction.\nOpen / close time: 3 to 5 seconds\nVoltage: 12vDC; 24vDC; 48vDC, 125vDC or 24vAC, 110vAC or 230vAC 50/60Hz\nCoil: 31400 14 to 20 Watt IP65 CE DIN43650A Class H 100% duty rated.\nProtection: IP65 with connector (included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.\nCoil option: M17 higher power IP65 100% duty coil for increased pressure range 1 to 16 Bar sizes up to DN300.\n\nThe BFE drum valve is with external pilot solenoid controller and manual override with patented cylindrical multi-functional valve design and internal piston are a perfect solution for large bore pipelines requiring high flow, anti-hammer design offering easy installation, maintenance and transport. \nThe external control solenoid is easily removed leaving a very robust cylindrical valve body, the internal piston design allows for very high flow rates as compared to standard solenoid valves.

12 in stock Model: BFE-D

3/4 Stainless Solenoid Valve 0-16 Bar 2/2 Normally Closed SPU220A-06H

3/4 inch Stainless Steel solenoid valve Shako SPU220A-06H\nFunction: 2/2 way normally closed\nOperation: Assisted lift (zero-rated)\nPort: 3/4 BSP, option NPT or Rc thread\nPressure: 0 to 16 Bar.\nOrifice: 20.0mm\nKV flow factor: 72 L/min based on water with 1 Bar pressure drop.\nBody: 316 stainless steel\nInternals: Stainless steel\nSeals: Viton standard, option EPDM, NBR or HNBR\nShading ring: Copper, option silver shading ring or without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +180°C with Viton seals, -15°C to +80°C NBR, -40°C to +150°C HNBR, -5°C to +130°C EPDM seal material.\nCoil: 18.5 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 0-3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC or 230vAC 50/60hz.\nHS Code 8481 8059

11 in stock Model: SPU22006H

304 Stainless solenoid valve flange DN50-500 2/2 N/Open 0.7-10 Bar BFE

Flanged stainless steel solenoid valve Z-Tide NOBFE-S\nFunction: 2/2 way normally open with anti water hammer design\nOperation: pressure assisted (requires min 0.7 Bar pressure difference)\nPressure: 0.7 to 10 Bar (Option 0.7 to 10 Bar)\nPort: Flange DN50 to DN500 PN16, option ANSI150lb\nBody: 304 stainless steel\nInternals: stainless steel\nPiston: stainless steel\nopen / close time: 3 to 5 seconds\nSeals: NBR U ring standard, option FKM or EPDM\nMedia: Water, steam or fluids under 50 CST compatible with materials of construction.\nVoltage: 12vDC; 24vDC; 125vDC or 24vAC, 110vAC or 230vAC 50/60Hz\nCoil: M16 26 Watt IP65 CE DIN43650A 100% duty rated.\nProtection: IP65 with connector (included)\nCoil option: ATEX EExmIIT4 for hazardous area zones 21 and 22.\n\nThe BFE drum valve is with external pilot solenoid controller and manual over ride with patented cylindrical multi-functional valve design and internal piston are a perfect solution for large bore pipelines requiring high flow, anti-hammer design offering easy installation, maintenance and transport.\nThe external control pipework is easily removed leaving a very robust cylindrical valve body, the internal piston design allows for very high flow rates as compared to standard solenoid valves.

0 in stock Model: NOBFE-S304