Nass Magnet Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 12v to 380v

Nass Magnet Solenoid Valve Coil System 13/30\nBore: 14.6mm, top plate 10mm\nHeight: 42mm\nWidth: 30mm\nLength: 39mm\nED 100%, Class H, protection according to EN 60529 IP65 with connector.\nConnection: according to: DIN EN 175301803-A\nMaterial: Thermoset resin\nVoltage tolerance: -10% to +10%\nAmbient Temperature: -20°C +50°C\n\nVoltages:\n12vAC 50/60Hz (113-030-0044 or use 12vdc with bridge rectifier connector)\n12vDC 15 Watt 9.7Ω, (113-030-0047, previously 2506442)\n24vAC 19.3VA 6.2 Ω, (113-030-0040, previously 0543 00.1-00/5768, 25002865)\n24vDC 15 Watt 37.8 Ω, (113-030-0028, previously 0543 00.1-00/5753, 2503154).\n48vAC 50/60Hz 19VA 24.3 Ω, (113-030-0052, previously 2507966)\n48vDC 10.9 Watts 20.5 Ω, (113-028-0044)\n64vAC 37.8 Ω\n110vAC 50/60Hz 17.6VA 135 Ω (113-030-0037, Previously 054300.1-00/6869, 2502864)\n110vDC 17 Watts 69 Ω, (113-030-0053, previously 25010353)\n220vDC 18 Watt 338 Ω, (113-030-0051)\n240vAC 50/60Hz, 17.6VA 701 Ω, (113-030-0203)\n380vAC 22VA 2002 Ω, (previously 0543 00.1-00/6755, 25007935)\n\nFits all Shako solenoid 2/2 way 3/8 to 2\" valves: PU220A, PU225A, PU225D, PU225DN, PU225S, PU225H, PU225X, SPU220 and SPU225 series

6281 in stock Model: 22003

Electrical Connector 2P+E Form A with LED IP65 PG9 10-50v or 70-250v

EN 175301-803 (DIN43650A) form A square IP65 connector with bipolar LED\n28mm square with 2 pins + earth pins 18mm\nConduit entry: PG9 (Cable 6-8mm)\nVoltage 10 to 50 volt or 70 to 250 volt\nMax voltage 250v AC, 300v DC\nMax operating current 10 Amp, Max current 16 Amp\nProtection: IP65 EN 60529 (DIN40050)\nInsulation class: C - VDE 0110\nWorking Temp: -25C to +90C\nTransparent housing: PA\nContact material: CuZn (Au)\nConnector: PA66 + 30% FV

1024 in stock Model: DIN2-LED-AC, DIN2-LED-DC

Solenoid Coil Core 13.2mm, H 38.7mm, W 36mm, L 47.3mm, 31400

Solenoid valve coil 36mm width, model 31400\nInsulation: Class F 155°C or class H 180°C\nConnection: DIN43650A\nBore: 13.2mm\nHeight: 38.7mm\nWidth: 36mm\nLength: 47.3 mm\nPower DC: 22 to 27 Watts according to voltage.\nPower AC: 26VA holding. \nVoltages: 12vDC, 24vDC, 48vDC, 80vDC and 200vDC or 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz\nResistance: \n12vDC 5Ω\n24vDC 26.6Ω\n110vAC 97Ω\n220vAC 402Ω

768 in stock Model: 31400

Solenoid Coil Core 13mm, H37.5mm, W36.5mm, L50mm WP-G1-D 12W

Solenoid Valve coil CS Fluid Power WP-G1-D\nBore: 13mm \nHeight: 37.5mm \nWidth: 36.5mm \nLength: 50mm\nConnection: ISO DIN 43650A \nClass: H 180°C\nProtection: IP68 (connector standard IP65 option IP67)\nApprovals: IP68, UL, CSA and CE registered\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC, 230vAC 50/60Hz.\nOptions: WPG1-F with 30 cm flying lead wires\n\nSpecifications / Resistance:\n12vDC 12 watts 12 Ω\n24vDC 12 watts 40 Ω\n24vAC 9.8VA 5.9 Ω\n110vAC 9.8VA 152.8 Ω\n240vAC 11.2VA 787 Ω\n\nFits CS fluid power solenoid valve series AD6000, AD8000, ADS6000, ADS8000, AD6, AD8, SA6, SA8, VX, ADS8, ADS10, HPVS, PA series valves.

535 in stock Model: WPG1

1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320